Elmer Net 6-30-23

WiresX & XLX multi mode

KE6JGM WiresX repeater works both FM and C4FM on 70cm

KE6JGM Repeater C4FM/FM 446.420 – offset FM-DCS 432 & WiresX 01966
* Link the club 2m repeater to this system with WiresX 01966
Remember to disconnect when done so the repeater will return to it’s room,
LDARC WiresX 62917

Hemet’s own, XLX618 & XLX318, Cross Mode Reflectors

These reflectors are available for any licensed ham to use!
Have fun and enjoy! Please come to me will any questions you may have. (KN6RBP) 73

They each have 26 Modules, and support DStar, DMR and of course, C4FM.
C4FM and DMR trans-code on all modules. DStar also works on all modules, but without trans-coding. Traffic on B,E,H,I,J,R are linked to the same module on the other reflector.
Please use DN, not VW mode, on Bob’s repeater. Neither XLX or DMR support it.
VW does work on Bob’s repeater, however that traffic won’t be heard on either reflector.
Not using VW is generally, a good practice, on linked, digital voice systems, like America Link & KC Wide (ironically).

XLX318 is now serving the “Hemet Hangout” in addition to 25 other rooms or modules.
XLX618 is the WiresX bridged HHO reflector and also has 26 modules/rooms.
Module A is the international linked XLX886 room.
Module E is linked and set aside for EMERGENCY, (ARES, RACES) traffic.
Module H is the Hemet Hangout on either reflector, and is also linked with
Bob’s (KE6JGM) Repeater, as well as WiresX 01966.

Use the links below for module info. Also see where people are, and find other active reflectors.

• XLX318 HEMET HANGOUT Multi-Mode Wiresx Reflector with 26 modules
• XLX618 KE6JGM Wiresx-Hemet Hangout Link with 26 modules.

Use WiresX commands or DGID to use the other modules with C4FM.
DMR may access any module with a hotspot.
Use XLX Master, then select the reflector and module of your choice.
DMR and C4FM stations may talk on any module, and be heard by the other mode.

Note*
Currently, DStar may use either reflector to talk to other DStar stations only. DStar users should NOT use module H (Hemet Hangout).
Module A or D on either XLX318 or XLX618 is recommended for DStar users.
DStar users, please don’t use module H. Modules A or D are recommended for DStar stations at this time.
DStar trans-coding, as well as DMR TG and linking to other XLX reflectors, is planned.